What a DTF transfer is

A DTF (direct-to-film) transfer is a full-color design printed on a carrier film, backed with white ink and a heat-activated adhesive. You press it onto the garment, peel the film, and the print stays on the fabric. There is nothing to weed and no screens to burn, so a single piece and a full run start from the same sheet.

What print shops use DTF transfers for

DTF is for apparel and soft goods. Shops order it for the jobs where setting up screens or digitizing a logo costs more than the order is worth.

  • Short runs and reorders that do not justify screen setup
  • Full-color art, gradients and photos with no per-color charge to work around
  • Left chest logos, sleeve hits and neck labels ganged next to the main design
  • Names and numbers, where every piece is different

How to order custom DTF transfers by the gang sheet

  1. Open an account. Hyperprints sells to the trade only.
  2. Build a sheet in the online gang sheet builder, or upload a gang sheet you have already laid out.
  3. Pick a sheet length. Standard lengths are 24, 36, 48, 60, 72, 96 and 120 inches, and the builder takes custom lengths from 12 to 240 inches.
  4. Check out in your account. Order updates arrive by text message.

Ordering works in English and Spanish, and the same account covers UV DTF for hard goods.

Build a DTF gang sheet →

Wholesale DTF transfer pricing

DTF gang sheets are priced by sheet length, about $0.60 per inch, not by how much art is on the sheet. Fill the sheet edge to edge and the price stays the same.

Sheet lengthEstimated DTF price
24 inches$14.40
36 inches$21.60
48 inches$28.80
60 inches$36.00
72 inches$43.20
96 inches$57.60
120 inches$72.00

See how gang sheets work →

Turnaround

DTF orders turn around in 24 to 48 hours, from upload to out the door. Hyperprints is based in Kansas City, MO, and the transfers are made in the USA.

How to press DTF transfers

These are hot peel transfers. Start with these settings:

  1. Pre-press the garment for 3 to 5 seconds to flatten it and drive out moisture.
  2. Press at 310°F for 12 to 15 seconds with medium-firm pressure.
  3. Peel hot, right away, in one smooth and even motion.
  4. Cover with a sheet and re-press for 5 to 10 seconds to finish.

Read the DTF pressing guide →

Who can order

Hyperprints is trade-only. We print for screen printers, embroidery shops, promo distributors and apparel brands. Open an account to order. If you want to see and press the product first, request samples through the contact page.

Questions

How much do wholesale DTF transfers cost?

About $0.60 per inch of sheet length, so a 36 inch gang sheet is $21.60. The builder quotes the exact price as you build.

How fast is the turnaround on DTF transfers?

Orders turn around in 24 to 48 hours, from upload to out the door. Order updates arrive by text message.

Who can order DTF transfers from Hyperprints?

Hyperprints sells to the trade only: print shops and brands. Open an account to start ordering.

What is the shortest DTF gang sheet I can order?

Custom lengths in the builder start at 12 inches and go up to 240 inches. Standard lengths run from 24 to 120 inches.

What temperature do I press DTF transfers at?

Press at 310°F for 12 to 15 seconds with medium-firm pressure, peel hot, then cover and re-press for 5 to 10 seconds. Always test first, since settings vary by garment and press.

Can I get DTF transfer samples before I order?

Yes. Request samples through the contact page.